Kohler M340 — Remote Control and Monitoring Setup (Index 13)
Installation · M340 controller
For the Kohler M340, from the Kohler service manual.
Browse Kohler generators & specs →
Procedure
- Enter index 13 for Remote Control.
- Set ON-LINE, LOCAL, LAN, REMOTE, and REMLAN as required.
- Enter LAN address (1-128) for each transfer switch.
- Enter SYS. ID password of up to six digits.
- Set BAUD RATE to 2400, 4800, or 9600 (default 9600).
Specs & values
- Baud rate must match modems and M340 Monitor software configuration
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.