Kohler M18 / M20 — Check Oil Level

Maintenance · Crankcase

For the Kohler M18 / M20, from the Kohler service manual.

Applies to: Kohler M18 / M20 engine

Procedure

1. Make sure engine is stopped, level, and cool.
2. Clean area around dipstick before removing.
3. Remove dipstick and wipe oil off.
4. Reinsert dipstick fully and remove to check level.
5. Oil level must be up to but not over the F mark.
6. Add proper oil if low; recheck on dipstick.

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →