Home›Repair guides›Kohler›Fuel filters removal and installation

Kohler KD83V16 — Fuel filters removal and installation

Maintenance · Fuel filter unit

For the Kohler KD83V16, from the Kohler service manual.

Applies to: Kohler KD83V16, Kohler KD83V16 engine

Before you start

  • Fuel supply closed

Parts for this job

Part numbers from the service-parts list for Kohler KD83V16. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove flange joints 3, 4, 5, 6.
  2. Remove screws 1.
  3. Remove protection guard 2.
  4. Remove screws 7.
  5. Remove fuel filter units 8.
  6. Install fuel filter units 8 with screws 7 and tighten.
  7. Screw protection guard 2 with screws 1.
  8. Install flange joints 3, 4, 5, 6.

Specs & values

Full service-parts list: Kohler KD83V16 →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →