Kohler KD62V12 — Starter removal and installation
Repair & overhaul
For the Kohler KD62V12, from the Kohler service manual.
Applies to: Kohler KD62V12, Kohler KD62V12 engine
Procedure
- Unplug wiring harness connection.
- Remove nut from ground connection and disconnect ground cable.
- Remove nut from power supply and disconnect power supply cable.
- Remove screws.
- Remove starter.
- Installation: position starter.
- Tighten screws.
- Connect plug.
- Connect power supply with nut and tighten to torque.
- Connect ground cable with nut and tighten according to tightening specifications.
Specs & values
- Starter nut M12: 22-30 Nm
Full service-parts list: Kohler KD62V12 →
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.