Kohler KD62V12 — Mount the turning device
Installation · Turning device / flywheel housing
For the Kohler KD62V12, from the Kohler service manual.
Applies to: Kohler KD62V12, Kohler KD62V12 engine
Before you start
- Dismount immediately the turning device and mount the cover on the flywheel housing before operating the engine
- Risk of injuries by ejected tools or turning device parts
Procedure
- Unscrew screws 4.
- Remove cover 3.
- Position turning device 2.
- Mount and tighten screws 1 according standard torque values.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Turning device screws M16x25 -8.8
Full service-parts list: Kohler KD62V12 →
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.