Home›Repair guides›Kohler›Fuel filters removal and installation

Kohler KD62V12 — Fuel filters removal and installation

Maintenance

For the Kohler KD62V12, from the Kohler service manual.

Applies to: Kohler KD62V12, Kohler KD62V12 engine

Before you start

  • Fire or explosion by flammable and explosive lubricants and fuels

Parts for this job

Part numbers from the service-parts list for Kohler KD62V12. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Ensure fuel supply is closed and fuel pipes and sensors disconnected.
  2. Remove flange joints.
  3. Remove screws.
  4. Remove fuel filters.
  5. Installation: install fuel filters with screws.
  6. Tighten screws to torque.
  7. Install flange joints.

Specs & values

  • Fuel filter screw 201AA Amazon eBay M10x1.5x30-8.8: 25 Nm

Full service-parts list: Kohler KD62V12 →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →