Kohler KD27V12 — Starting the engine
Operation
For the Kohler KD27V12, from the Kohler service manual.
Applies to: Kohler KD27V12, Kohler KD27V12 engine
Before you start
- An unexpected start of the engine can cause severe injury or death.
- Continuous actuation damages the starter.
- Make sure the oil pressure builds up immediately after the engine is started.
Procedure
- Pay attention to the safety instructions in the chapter "Safety".
- Switch on the electrical power supply (battery voltage).
- Check that there are no error messages with the KODIA diagnostic program.
- Press the starter for a maximum of 30 seconds.
- If the engine does not start, wait at least two minutes then press the starter again for a maximum of 30 seconds.
- Wait at least five minutes before every subsequent attempt.
- If the engine still does not start, check all connections and operating materials; troubleshoot with KODIA.
Tools required
- KODIA diagnostic program Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Starter actuation max. 30 s
- Wait at least 2 min after first attempt
- Wait at least 5 min after every subsequent attempt
Full service-parts list: Kohler KD27V12 →
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.