Kohler KD27V12 — Fitting and removing the fastening pieces
Maintenance · Lifting device
For the Kohler KD27V12, from the Kohler service manual.
Applies to: Kohler KD27V12, Kohler KD27V12 engine
Before you start
- The lifting device may be torn out and the engine can fall down.
- Observe a maximum deviation of 10° between the perpendicular and the engine axis.
Procedure
- Fit/remove ring bolt and lifting hook.
- Tighten hex screws with the specified torques.
- Use washer and socket head screws as shown.
Specs & values
- Hex screw M12-10.9: 104 ±20 Nm (76.7 ±14.7 ft lb)
Full service-parts list: Kohler KD27V12 →
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.