Kohler K361 — Ignition System Operational Test
Testing & diagnosis
For the Kohler K361, from the Kohler service manual.
Browse Kohler generators & specs →
Before you start
- Wipe up spilled gasoline and cover containers of flammable liquids when performing this test.
Procedure
- Remove the high tension lead at the spark plug.
- Bend a paper clip and insert into boot.
- Hold end about 1/16 in. to 1/8 in. away from cylinder head while cranking engine.
- A sharp snappy spark indicates coil, condenser and breaker points are apparently not at fault.
Tools required
- Paper clip Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Spark gap 1/16 in. to 1/8 in.
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.