Kohler K361 — Carburetor Disassembly (Side Draft)

Repair & overhaul

For the Kohler K361, from the Kohler service manual.

Browse Kohler generators & specs →

Procedure

1. Remove carburetor from engine.
2. Remove bowl nut, gasket and bowl.
3. Remove float pin, float, needle and needle seat; inspect float.
4. Remove bowl ring gasket.
5. Remove idle fuel and main fuel adjusting needles and springs.
6. Do not remove choke and throttle plates and shafts.

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →