Kohler GM22703-KP1 / GM22703-KP3 — Remove the generator set and transfer switch from service
Installation · Transfer switch / generator set
For the Kohler GM22703-KP1 / GM22703-KP3, from the Kohler service manual.
Browse Kohler generators & specs →
Before you start
- Hazardous voltage. Will cause severe injury or death. Disconnect all power sources before opening the enclosure.
- Reconnect negative (--) leads last when reconnecting the battery cables after servicing.
Procedure
- Place all generator set master switches in the OFF position or press the OFF/RESET button, as applicable.
- Disconnect the power to all battery chargers, if equipped.
- Disconnect all generator set engine starting battery(ies), negative (--) leads first.
- Disconnect all power sources to transfer switches and power monitors.
- Turn off and disconnect the power to all devices in the system.
- Open the transfer switch enclosure.
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.