Kohler GM22703-KP1 / GM22703-KP3 — Install compression latch on security cover
Installation · Security cover compression latch
For the Kohler GM22703-KP1 / GM22703-KP3, from the Kohler service manual.
Browse Kohler generators & specs →
Before you start
- If the compression latch does not lock, verify that the security door is level. Verify that the security cover and latch bracket align. Adjust the hardware as necessary.
Procedure
- Remove the nut from the compression latch (GM51992).
- Place the padlock bracket (GM57166) and compression latch gasket on the compression latch (GM51992).
- Place the compression latch assembly in the hole of the security cover.
- Position the padlock bracket with the padlock holes horizontal. Install and tighten the mounting nut.
- Verify that the compression latch locks and unlocks the security cover. Adjust the hardware as necessary.
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.