Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Follow procedure below.

Kohler 62 690 13 Rev. D — Follow procedure below.

For the Kohler 62 690 13 Rev. D.

Applies to: Kohler 62 690 13 Rev. D

Procedure

  1. Add Kohler PRO Series fuel treatment or equivalent to fuel tank. Run engine 2-3 minutes to get stabilized fuel into fuel system (failures due to untreated fuel are not warrantable).
  2. Change oil while engine is still warm from operation (NOT required if using KOHLER PRO 10W-50 full-synthetic oil). Remove spark plug(s) and pour about 1 oz. of engine oil into cylinder(s). Replace spark plug(s) and crank engine slowly to distribute oil.
  3. Disconnect negative (–) battery cable.
  4. Store engine in a clean, dry place.

Source: manual:62_690_13_EN.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.