Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Flywheel Disassembly

Kohler KD 441 — Flywheel Disassembly

For the Kohler KD 441.

Browse Kohler generators & specs →

Before you start

  • During the demounting phases, pay particular attention to prevent the flywheel from dropping as this could seriously injure the operator.
  • Wear protective goggles when removing the flywheel ring.

Procedure

  1. Remove the connecting rod cap from the shaft and remove it.
  2. Tighten threaded bar A of the special tool in the threading of the connecting rod shaft.
  3. Remove the starting...

Tools required

  • protective goggles

Source: manual:1_5302_865_Rev_02_MO_KD_441.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.