Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Oil Level Check

Kohler SH255, SH265, SH270 — Oil Level Check

For the Kohler SH255, SH265, SH270.

Applies to: Kohler Sh255

Before you start

  • To prevent extensive engine wear or damage, never run engine with oil level below or above operating range indicator on dipstick.

Procedure

  1. Ensure engine is cool. Clean oil fill/dipstick areas of any debris.
  2. 1. Remove dipstick; wipe oil off.
  3. 2. Reinsert dipstick into tube; rest on oil fill neck; turn counterclockwise until cap drops down to lowest point of thread leads; do not thread cap onto tube.
  4. 3. If oil is low, add oil up to point of overflowing filler neck.
  5. 4. Reinstall dipstick or oil fill plug and tighten securely.

Source: manual:KOHLER_SH270_MANUALE_USO_MILTI_18_590_26_GLOBAL.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.