Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Check Oil Level

Kohler — Check Oil Level

A Kohler service procedure — check it applies to your exact model before use.

Browse Kohler generators & specs →

Before you start

  • To prevent extensive engine wear or damage, never run engine with oil level below or above operating range indicator on dipstick.

Procedure

  1. Ensure engine is cool and level.
  2. Clean oil fill/dipstick areas of any debris.
  3. Remove dipstick and wipe oil off.
  4. Reinsert dipstick into tube and press completely down.
  5. Remove dipstick and check oil level. Level should be at top of indicator on dipstick.
  6. If oil is low on indicator, add oil up to top of indicator mark.
  7. Reinstall and secure dipstick.

Source: manual:32_590_26_EN.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.