Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Oil Change Procedure

Kohler — Oil Change Procedure

A Kohler service procedure — check it applies to your exact model before use.

Browse Kohler generators & specs →

Before you start

  • Engine should be warm for oil change

Procedure

  1. Change oil while engine is still warm from operation (NOT required if using KOHLER PRO 10W-50 full-synthetic oil).
  2. Remove spark plug(s) and pour about 1 oz. of engine oil into cylinder(s).
  3. Replace spark plug(s) and crank engine slowly to distribute oil.

Specs & torque values

  • KOHLER PRO 10W-50 full-synthetic oil (optional)

Source: manual:24_690_32_EN.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.