Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Engine Storage Procedure

Kohler — Engine Storage Procedure

A Kohler service procedure — check it applies to your exact model before use.

Browse Kohler generators & specs →

Before you start

  • Failure due to untreated fuel are not warrantable.

Procedure

  1. Add Kohler PRO Series fuel treatment or equivalent to fuel tank.
  2. Run engine 2-3 minutes to get stabilized fuel into fuel system.
  3. Change oil while engine is still warm from operation.
  4. Remove spark plug(s).
  5. Pour about 1 oz. of engine oil into cylinder(s).
  6. Replace spark plug(s).
  7. Crank engine slowly to distribute oil.
  8. Disconnect negative (–) battery cable.
  9. Store engine in a clean, dry place.

Specs & torque values

  • Fuel treatment: Kohler PRO Series or equivalent
  • Oil pour amount: about 1 oz. per cylinder

Source: manual:32_590_26_EN.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.