Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›DISASSEMBLY

Kohler — DISASSEMBLY

A Kohler service procedure — check it applies to your exact model before use.

Browse Kohler generators & specs →

Procedure

  1. 2. Carefully push the connecting rod and the piston
  2. away from the crankshaft and out of the cylinder
  3. bore.
  4. 2. Remove the crankshaft from the crankcase. See
  5. REMOVE PISTON FROM CONNECTING Figure 9-44.
  6. 1. Remove the wrist pin retainer and wrist pin. Sepa-
  7. rate the piston from the connecting rod. See Fig-
  8. ure 9-42.

Source: manual:Kohler_Command_Series_Serv_Man.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.