Kohler — DISASSEMBLY

A Kohler service procedure — check it applies to your exact model before use.

Browse Kohler generators & specs →

Procedure

1. 1. Remove the grass screen from fan. Refer to
2. Figure 9-16.
3. 2. Hold the flywheel with the strap wrench and loos-
4. en the hex. cap screw. Remove hex. cap screw,
5. split lock washer, and plain washer. Refer to
6. Figure 9-17.
7. 3. Remove the flywheel from crankshaft using a pull-
8. er, Refer to Figure 9-18,
9. 4. Remove the hex. flange screws, spacers, and fan.
10. Refer to Figure $-19.

Source: manual:Magnum_M18_and_M20_Service_Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.