Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›DISASSEMBLY

Kohler — DISASSEMBLY

A Kohler service procedure — check it applies to your exact model before use.

Browse Kohler generators & specs →

Procedure

  1. 1. Remove the connector from rectifier-regulator.
  2. Remove the lead from center position of connec-
  3. tor. Remove the hex. cap screws and rectifier-
  4. regulator. Refer to Figure 9-9.
  5. 2. Remove the connector from key switch. Remove
  6. kill lead from connector. Remove the self-tapping
  7. screws and panel with key switch. Refer to
  8. Figure 9-10.
  9. 1. Remove the self-tapping screws and top baffle.
  10. 2. Remove the self-tapping screws and #1 side cyl-
  11. inder head baffle.
  12. 3. Remove the self-tapping screws and #2 side cyl-
  13. inder head baffle.
  14. 4. Remove the self-tapping screws and blower
  15. housing.

Specs & torque values

  • 1
  • 2

Source: manual:Magnum_M18_and_M20_Service_Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.