Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›remove key from ignition switch. Any load mate-

Kohler Workman HDX Auto — remove key from ignition switch. Any load mate-

For the Kohler Workman HDX Auto.

Applies to: Kohler Workman Hdx Auto

Procedure

  1. Raise bed until lift cylinders are fully extended.
  2. Remove bed safety support from storage brackets
  3. Push bed safety support onto cylinder rod, making
  4. To store bed safety support, remove support from lift
  5. Always install or remove bed safety support from
  6. Do not try to lower bed with bed safety support on lift
  7. Bed safety support
  8. Cylinder barrel
  9. Bed
  10. 09375

Tools required

  • remove key from ignition switch. Any load mate-
  • Using a Torque Wrench with an Offset Wrench

Source: manual:15217SL.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.