Kohler Workman HDX Auto — remove the key from the switch.
For the Kohler Workman HDX Auto.
Applies to: Kohler Workman Hdx Auto
Before you start
- pair of the machine.
- A NOTE will give general information about the
- portant instructions which must be followed to pre-
- machine.
- vent damage to systems or components on the
- IMPORTANT: The IMPORTANT notice will give im-
- correct operation, maintenance, service, testing, or re-
Procedure
- Review and understand the contents of the Opera-
- Keep all shields, safety devices and decals in place.
- Assure interlock switches are adjusted correctly so
- Since fuel used in Workman HDX Auto vehicles is
- Sit on the operator seat when starting and operating
- When starting the engine:
- Do not run engine in a confined area without ade-
- Do not touch engine, exhaust system components,
- Before getting off the seat:
- Do not park on slopes unless wheels are chocked or
- Before servicing or making adjustments:
- Make sure vehicle is in safe operating condition by
- Never store the vehicle or fuel container inside
- Never work under a raised bed without placing the
- Make sure all hydraulic line connectors are tight and
- Keep body and hands away from pin hole leaks in hy-
- Before disconnecting or performing any work on the
- If major repairs are ever needed or assistance is de-
- To reduce potential fire hazard, keep engine area
- If engine must be running to perform maintenance or
- Do not overspeed the engine by changing governor
- Shut engine off before checking or adding oil to the
- Disconnect battery before servicing the vehicle. Dis-
Tools required
- Special Tools
- E. Remove key from ignition switch.
- remove the key from the switch.
- F. Turn ignition key to START. Release key when
Source: manual:15217SL.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.