Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Engine Storage Preparation

Kohler 62 690 13 Rev. D — Engine Storage Preparation

For the Kohler 62 690 13 Rev. D.

Applies to: Kohler 62 690 13 Rev. D

Before you start

  • Fuel is flammable
  • Do not operate engine indoors

Procedure

  1. Add Kohler PRO Series fuel treatment or equivalent to fuel tank. Run engine 2-3 minutes to get stabilized fuel into fuel system.
  2. Change oil while engine is still warm from operation. Remove spark plug(s) and pour about 1 oz. of engine oil into cylinder(s). Replace spark plug(s) and crank engine slowly to distribute oil.
  3. Disconnect negative battery cable.
  4. Store engine in a clean, dry place.

Specs & torque values

  • Kohler PRO Series fuel treatment
  • 10W-50 full-synthetic oil

Source: manual:62_690_13_EN.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.