Kohler — 4. Remove brushes from brush holder, and remove

A Kohler service procedure — check it applies to your exact model before use.

Browse Kohler generators & specs →

Procedure

1. 2. Cut the brush lead wire at the edge of the post
2. with a pair of nippers.
3. 3. File off burrs on the post.
4. Remove burrs
5. File
6. Figure 8-30. Filing Off Burrs on Posts,
7. 4, Place the plate of the spare brush on the welded
8. portion af the brush lead wire, and then crimp
9. them together with a pair of pliers. Be sure to
10. align the edge of the lead wire.
11. 8.18

Source: manual:Magnum_M18_and_M20_Service_Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.