Kohler — GENERATOR DISASSEMBLY — REASSEMBLY
For these Kohler models: 10/15RMOY, 15/17.5ROY, 15RMY, 22.5-47.5ROZ, 22.5/32.5RZ.
Applies to: Kohler 15Rmy, Kohler 22 5 47 5Roz
Procedure
- 3. End Bracket
- Figure 4-34. Position Adapter
- 9.
- Place generator fan on rotor. Position drive discs on
- rotor flange. Make sure all holes are in proper align-
- ment and replace eight hardened washers and
- mounting bolts. Torque bolts to 50 ft. Ibs. (6.92 Kgm)
- (Figure 4-35),
- 10.
- 11.
- 12.
- 13.
- 14.
- 15.
- 16.
- 17.
- 18.
- 1. Torque Wrench
- 2. Drive Discs
- Figure 4-35. Torque Drive Disc Bolts
- Hoist assembled generator to a level position in line
- with studs on flywheel.
- Guide generator as necessary to work drive discs over
- studs.
- Slide spacers over studs between drive discs and fan
Tools required
- 1. Torque Wrench
- Hoist assembled generator to a level position in line
- Figure 4-34. Position Adapter
Specs & torque values
- 35. Torque
- 1. Torque
Source: manual:R Series Service TP5074.PDF. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.