Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›1. Remove the self-tapping screws and top baffle.

Kohler — 1. Remove the self-tapping screws and top baffle.

A Kohler service procedure — check it applies to your exact model before use.

Browse Kohler generators & specs →

Procedure

  1. 2. Remove the self-tapping screws and #1 side cyl-
  2. inder head baffle.
  3. 3. Remove the self-tapping screws and #2 side cyl-
  4. inder head baffle.
  5. 4. Remove the self-tapping screws and blower
  6. housing.
  7. 1. Remove the hex. nut, copper washer, breather
  8. cover, and gasket. Refer to Figure 9-12.
  9. Figure 9-10. Removing Key Switch.

Specs & torque values

  • 1
  • 2

Source: manual:Magnum_M18_and_M20_Service_Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.