Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›GENERATOR DISASSEMBLY — REASSEMBLY

Kohler — GENERATOR DISASSEMBLY — REASSEMBLY

For these Kohler models: 10/15RMOY, 15/17.5ROY, 15RMY, 22.5-47.5ROZ, 22.5/32.5RZ.

Applies to: Kohler 15Rmy, Kohler 22 5 47 5Roz

Procedure

  1. 14. Fasten lifting eye and hoist hook to rotor flange. Hoist
  2. rotor to remove (Figure 4-30).
  3. 15. Finish removing four stator to end bracket and four
  4. stator to adapter attachment bolts (47.5 kW). Reach
  5. under supported end bracket and finish removing
  6. four long overbolts from adapter (all other models).
  7. 1. Drive Discs
  8. 2. Generator Fan
  9. 3. Generator Adapter
  10. Figure 4-29. Drive Discs and Fan
  11. 1. Lifting Eye
  12. 2. Rotor Fiange

Tools required

  • stator to adapter attachment bolts (47.5 kW). Reach
  • four long overbolts from adapter (all other models).
  • 3. Generator Adapter

Source: manual:R Series Service TP5074.PDF. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.