Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›REMOVE PISTON RINGS

Kohler — REMOVE PISTON RINGS

A Kohler service procedure — check it applies to your exact model before use.

Browse Kohler generators & specs →

Procedure

  1. 2. Remove the bearing from the crankcase using
  2. 1. Remove the top and center compression rings handle #NU-4747 and bearing remover
  3. using a ring expander tool. See Figure 9-43. #KO-1029. See Figure 9-45.

Tools required

  • using a ring expander tool. See Figure 9-43. #KO-1029. See Figure 9-45.
  • 1. Remove the top and center compression rings handle #NU-4747 and bearing remover

Specs & torque values

  • NU-4747
  • KO-1029

Source: manual:Kohler_Command_Series_Serv_Man.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.