Kohler — Disassembly/Reassembly - Commercial Mower

A Kohler service procedure — check it applies to your exact model before use.

Browse Kohler generators & specs →

Procedure

1. 1. Remove the air cleaner components from the air
2. 2. Remove the two nuts holding the air cleaner base
3. 3. Remove the tube from the base.
4. 4. Separate the base from the carburetor.
5. 5. Reverse procedure to reassemble components.
6. 4. Remove the base and gasket. Carefully feed the
7. 5. Reverse procedure to reassemble components.

Source: manual:service-manual-cv17-745.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.