Home›Repair guides›Kohler›Clutch Adjustment (wet disc type)

Kohler — Clutch Adjustment (wet disc type)

Adjustments

From a Kohler service manual covering: CH18, CH20, CH22, CH23, CH25, CH620, CH630, CH640, CH670, CH680, CH730, CH740…. Check it applies to your exact model before use.

Applies to: Kohler CH18, Kohler CH740

Before you start

  • Do not attempt to pry or force spring lock away from ring.

Procedure

  1. Release clutch and remove nameplate. Using a large screwdriver, turn adjusting ring clockwise, one notch at a time, until firm pressure is required to engage clutch.
  2. After adjustment, engage clutch and check that rollers go over center to lock unit in engaged position and prevent releasing under load.
  3. If trouble persists after readjustment, clutch reconditioning is indicated.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • 40-45 pounds pull at lever handle

Full service-parts list: Kohler CH740 →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →