Kohler — Checking Oil Level
Maintenance · lubrication system
From a Kohler service manual covering: CV17, CV18, CV20, CV22, CV23, CV25, CV26, CV730, CV740, CV745. Check it applies to your exact model before use.
Browse Kohler generators & specs →
Before you start
- Never operate engine with oil level below low mark or above full mark.
Procedure
- Make sure engine is stopped, level, and cool.
- Clean area around oil fill cap/dipstick before removing.
- Unthread and remove cap/dipstick, wipe oil off.
- Reinsert dipstick and rest cap on tube (do not thread on).
- Check level between FULL and ADD marks; add proper oil if low.
- Reinstall oil fill cap/dipstick and thread tight.
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.