Home›Repair guides›Kohler›Battery Installation Procedure

Kohler — Battery Installation Procedure

Installation · Engine starting battery

From a Kohler service manual covering: 12RES, 12RESL/12RESM1, 18RES. Check it applies to your exact model before use.

Applies to: Kohler 12RES, Kohler 18RES

Before you start

  • Sulfuric acid in batteries. Can cause severe injury or death. Wear protective goggles and clothing.
  • Explosion. Relays in the battery charger cause arcs or sparks. Locate the battery in a well-ventilated area.

Procedure

  1. Ensure that the starting battery is fully charged before placing the battery in service.
  2. Clean the battery posts and/or adapters if necessary.
  3. Install the battery post adapters, if needed.
  4. Place the battery in the housing.
  5. Verify that the controller master switch is in the OFF position.
  6. Connect the positive (+) lead to the engine starting battery.
  7. Connect the negative (--) lead to the engine starting battery.

Specs & values

Full service-parts list: Kohler 12RES →, Kohler 18RES →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →