Kohler — Auxiliary Switch Removal (25-80 Ampere Contactors)

Repair & overhaul

From a Kohler service manual — check it applies to your exact model before use.

Browse Kohler generators & specs →

Procedure

1. Disconnect the wire harness from the auxiliary switch.
2. If the contactor is electrically held, release the lock and slide the auxiliary switch up and off the contactor.
3. If the contactor is mechanically held, lift the yellow tab and rotate the auxiliary switch down and to the side.

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →