Kohler — Air Cleaner Element Replacement
Maintenance
From a Kohler service manual covering: ECV850, ECV860, ECV870, ECV880. Check it applies to your exact model before use.
Browse Kohler generators & specs →
Before you start
- Paper element cannot be blown out with compressed air.
- Operating engine with loose or damaged air cleaner components could cause premature wear and failure.
Procedure
- Unhook retaining clips and remove end cap(s).
- Check and clean inlet screen (if equipped).
- Pull air cleaner element out of housing and replace.
- Check condition of inner element (if equipped); replace when dirty.
- Check all parts for wear, cracks, or damage; clean ejector area.
- Install new element(s).
- Reinstall end cap(s) with dust ejector valve/screen down; secure with retaining clips.
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.