Home›Repair guides›Kohler›Starting

Kohler 48RCLB / KG6208 — Starting

Operation · Engine starting

For the Kohler 48RCLB / KG6208, from the Kohler operator's manual.

Applies to: Kohler 48RCLB, Kohler KG6208 engine

Before you start

  • Accidental starting: disconnect battery cables, negative (–) lead first
  • Carbon monoxide: never operate the engine inside a building

Procedure

  1. Follow the starting sequence for the equipment that this engine powers.
  2. If the engine does not start after 15 seconds of cranking, wait at least 15 seconds before trying again.
  3. Do not crank the starter longer than three crank cycles.
  4. After three crank cycles the controller will display faults.
  5. If the engine does not start after three attempts, discontinue starting and troubleshoot.

Specs & values

  • Crank no longer than 15 seconds; wait 15 seconds between attempts; maximum three crank cycles

Full service-parts list: Kohler 48RCLB →

Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →