Kohler 48RCLB / KG6208 — Removal from Storage
Maintenance · Engine storage
For the Kohler 48RCLB / KG6208, from the Kohler operator's manual.
Applies to: Kohler 48RCLB, Kohler KG6208 engine
Before you start
- The engine may smoke when started for the first time after storage; this is normal
Procedure
- Remove protective cloths, covers, and caps from the engine.
- Clean protectant from exposed metal parts and electrical components.
- Reinstall the drive belt.
- Check fluid levels and fill as needed.
- Connect the battery.
- Connect the fuel supply and open fuel valves.
- Start the engine and allow it to run for several minutes without load; check for leaks.
- Check oil pressure and fuel pressure gauges to make sure the engine is operating normally.
Full service-parts list: Kohler 48RCLB →
Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.