Kohler 48RCLB / KG6208 — Long-Term Storage (More than 30 Days)
Maintenance · Engine storage
For the Kohler 48RCLB / KG6208, from the Kohler operator's manual.
Applies to: Kohler 48RCLB, Kohler KG6208 engine
Before you start
- Hot engine and exhaust system: do not work on the engine until it cools
Procedure
- Change the engine oil and filter.
- Remove the drive belt.
- Disconnect the spark plug wires and remove the spark plugs.
- Squirt approximately 30 ml (1 ounce) of fresh engine oil into each cylinder.
- Manually rotate the crankshaft 10–15 times to distribute the oil evenly in the cylinders.
- Install the spark plugs and reconnect the spark plug wires.
- Cover all exposed metal parts with a suitable protectant.
- Coat all electrical connectors with a suitable protectant.
Tools required
- Spark plug wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Approximately 30 ml (1 ounce) of fresh engine oil per cylinder
- Rotate crankshaft 10–15 times
Full service-parts list: Kohler 48RCLB →
Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.