Kohler 48RCLB / KG6208 — Check Hoses and Clamps

Maintenance · Cooling system hoses and clamps

For the Kohler 48RCLB / KG6208, from the Kohler operator's manual.

Applies to: Kohler 48RCLB, Kohler KG6208 engine

Procedure

1. Inspect the hoses for cracks, abrasions, cuts, bulges, swollen ends, or leaks.
2. Squeeze the hoses; they should yield slightly to moderate pressure.
3. Replace faulty hoses before operating the engine.
4. Verify that all clamps are in place and adjust and tighten as needed.

Full service-parts list: Kohler 48RCLB →

Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →