Kohler 48RCLB / KG6208 — Check Fuel Supply Pipe and Connections
Maintenance · Fuel system
For the Kohler 48RCLB / KG6208, from the Kohler operator's manual.
Applies to: Kohler 48RCLB, Kohler KG6208 engine
Before you start
- Explosive fuel vapors can cause severe injury or death
Procedure
- With the fuel valve fully opened and the engine stopped, check all fuel system connections and lines for leaks using a soapy water solution.
- Correct any leaks before restarting the engine.
- Do not start the engine if you can smell leaking gas.
Tools required
- Soap and water solution Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- LPG vapor or NG system test pressure 6–8 ounces per square inch (10–14 inches water column)
- LPG liquid withdrawal system test pressure at least 90 psi (621 kPa)
Full service-parts list: Kohler 48RCLB →
Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.