Kohler 48RCLB / 60RCLA — Storage Procedure
Maintenance · Generator set
For the Kohler 48RCLB / 60RCLA, from the Kohler operator's manual.
Applies to: Kohler 48RCLB, Kohler 60RCLA
Before you start
- Use antifreeze capable of withstanding the lowest possible temperatures.
- Run the generator set once a month whenever possible.
Procedure
- Start and run the generator set until it reaches operating temperature or about 15 minutes.
- Stop the generator set.
- Change the oil and oil filter.
- Check the engine coolant protection.
- Keep spark plugs in their holes or seal spark plug holes with suitable threaded metal plugs.
- Clean the exterior and spread a light film of oil or silicon spray over exposed surfaces.
- Seal the air inlet, exhaust pipe, and fuel tank cap with tape.
- Disconnect and remove the battery; place it in a warm, dry location and recharge once a month.
- Select a well-ventilated (not humid or dusty) location to store the generator.
- Cover the entire unit with a dust cover.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Kohler 48RCLB →, Kohler 60RCLA →
Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.