Kohler 48RCLB / 60RCLA — Procedure to Change Settings
Adjustments · RDC2 controller
For the Kohler 48RCLB / 60RCLA, from the Kohler operator's manual.
Applies to: Kohler 48RCLB, Kohler 60RCLA
Before you start
- Use caution when navigating the controller menus; in some menus pressing the Select button can enable editing of the controller settings.
Procedure
- Press the Select button to enter the main menu.
- Press the down arrow button until the desired menu is displayed.
- Press the Select button to enter the selected menu.
- Press the down arrow button to step through the parameters in the selected menu.
- To change a setting, press the Select button; the selected setting flashes.
- Press the up or down arrow buttons to increase or decrease the setting.
- When the desired setting is shown, press Select; the value stops flashing.
- Repeat steps 5 through 7 for each setting on the screen.
- Press the down arrow to step to the next screen.
- To exit, press the down arrow button until Return is displayed and press Select.
- Press the AUTO or OFF button to exit the main menu.
Full service-parts list: Kohler 48RCLB →, Kohler 60RCLA →
Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.