Home›Repair guides›Kohler›Final Steps

Kohler 48RCLB / 60RCLA — Final Steps

Installation · Generator set

For the Kohler 48RCLB / 60RCLA, from the Kohler service manual.

Applies to: Kohler 48RCLB, Kohler 60RCLA, Kohler KG6208 engine

Before you start

  • Explosive fuel vapors. Use extreme care when handling, storing, and using fuels.

Procedure

  1. Reconnect the battery.
  2. Re-apply the 120 VAC power supply by closing the upstream circuit breaker.
  3. Reconnect the fuel line and turn on the fuel supply.
  4. Press RUN to start the generator set and check for leaks with the engine running.
  5. Follow Section 4.8 to purge air from the cooling system.
  6. If equipped, plug in the block heater power cord.
  7. Press OFF to turn off the generator set; then press AUTO if an ATS or remote start/stop switch is used.

Full service-parts list: Kohler 48RCLB →, Kohler 60RCLA →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →