Home›Repair guides›Kohler›Changing Oil Filter

Kohler 200REOZV / D 200 — Changing Oil Filter

Maintenance · Lubrication system

For the Kohler 200REOZV / D 200, from the Kohler service manual.

Applies to: Kohler 200REOZV

Parts for this job

Part numbers from the service-parts list for Kohler 200REOZV. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Place a receptacle beneath the filter.
  2. Clean the filter attachment and remove the filter using tool 9999179.
  3. Moisten the seals on the new filter with oil and screw in by hand until the seals contact the attachment.
  4. Tighten the filter by hand another half a turn.
  5. Fill with engine oil and rotate the engine with the starter motor until oil pressure is indicated.
  6. Start the engine and check for oil leaks around the filter.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Kohler 200REOZV →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →