Katolight E6921M1 / REO2IMI — Remount Single-Bearing Generator to Engine

Installation · Generator and engine

For the Katolight E6921M1 / REO2IMI, from the Katolight service manual.

Browse Katolight generators & specs →

Procedure

1. Align bolt holes of generator driving disc with engine flywheel; install bolts and turn until fingertight.
2. Install and tighten generator frame flange-to-flywheel housing mounting bolts.
3. Install and tighten generator foot-to-chassis mounting bolts.
4. Add oil if bearing is oil lubricated.
5. Rotate engine-generator system a few revolutions to center fan.
6. Tighten generator driving disc-to-engine flywheel bolts.
7. Restore electrical circuits.

Source: Katolight service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Katolight repair guides →