Katolight E6921M1 / REO2IMI — Lubrication - Oil-Lubricated Bearings
Maintenance · Generator bearing
For the Katolight E6921M1 / REO2IMI, from the Katolight service manual.
Browse Katolight generators & specs →
Before you start
- New generators are shipped without oil. Add oil before running generator.
Procedure
- Maintain oil level to line on sight gage; do not overfill.
- After adding oil, run engine several minutes, then shut down and recheck oil level.
- Check oil level every 300 hours; change oil every six months.
- Use same weight and quality oil in bearing reservoir as specified by engine manual for engine crankcase.
Specs & values
- Check oil level every 300 hours
- Change oil every six months
Source: Katolight service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.