John Deere — Replace Fuel Filter Assembly (Rotary Fuel

A John Deere service procedure — check it applies to your exact model before use.

Browse John Deere generators & specs →

Procedure

1. 1. Filling batteries in a well-ventilated area.
2. 2. Wearing eye protection and rubber gloves.
3. 3. Avoiding breathing fumes when electrolyte is added.
4. 4. Avoiding spilling or dripping electrolyte.
5. 5. Use proper jump start procedure.
6. 1. Flush your skin with water.
7. 2. Apply baking soda or lime to help neutralize the acid.
8. 3. Flush your eyes with water for 15—30 minutes. Get
9. 1. Do not induce vomiting.
10. 2. Drink large amounts of water or milk, but do not
11. 3. Get medical attention immediately.
12. 1. Each engine has a 13-digit John Deere engine serial
13. 2. The second line of information (C) identifies the
14. 3. The second line of information on Saran serial number mm mm L
15. 2.9
16. 2.9
17. 17.8:1
18. 17.8:1 kW kW kW kg
19. 0.10% (1000 ppm) is STRONGLY recommended.

Source: manual:CTM125.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.