John Deere — Preparing Machine for Storage
Maintenance
From a John Deere owner's manual — check it applies to your exact model before use.
Browse John Deere generators & specs →
Before you start
- Do not store vehicle with fuel in the tank inside a building where fumes reach an open flame or spark
- Allow the engine to cool before storing the machine in any enclosure
Procedure
- Repair any worn or damaged parts. Replace parts if necessary. Tighten loose hardware.
- To prevent rust, repair scratched or chipped metal surfaces.
- Remove grass and debris from machine.
- Clean under the rotary deck and remove grass and debris from inside chute and bagger, if applicable.
- Wash the machine and apply wax to metal and plastic surfaces.
- To dry belts and pulleys, run machine for five minutes.
- To prevent rust, apply light coat of engine oil on pivot and wear points.
- Lubricate grease points and check tire pressure.
Specs & values
- Engine storage procedure should be used when vehicle is not to be used for longer than 60 days
Source: John Deere owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.