John Deere 6068HF475 — Starting the Engine
Operation
For the John Deere 6068HF475, from the John Deere owner's manual.
Applies to: PowerTech 6068HF475
Before you start
- Do not operate the starter for more than 30 seconds at a time.
Procedure
- Perform all prestarting checks.
- Open fuel supply shut-off valve if equipped.
- Disengage clutch controlling any engine drivelines.
- Set slow idle.
- Turn key start switch clockwise to crank; release when engine starts.
- Idle engine at not more than 1200 rpm until warm.
- Check all gauges for normal operation.
Full service-parts list: PowerTech 6068HF475 →
Source: John Deere owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.