John Deere 6068HF475 — Preparing Engine for Long Term Storage

Maintenance

For the John Deere 6068HF475, from the John Deere owner's manual.

Applies to: PowerTech 6068HF475

Procedure

1. Change engine oil and replace filter; add rust preventive oil.
2. Service air cleaner.
3. Drain, flush, and refill cooling system for extended storage.
4. Pour three ounces of rust preventive oil into turbocharger intake.
5. Circulate diesel fuel/rust preventive oil solution through injection system while cranking.
6. Loosen or remove fan/alternator poly-vee belt.
7. Remove, clean, and store batteries fully charged.
8. Clean exterior; seal all openings; store in dry protected place.

Full service-parts list: PowerTech 6068HF475 →

Source: John Deere owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More John Deere repair guides →